600mm/s speed for engraving photo, super smooth vector cutting quality.
Honey comb table
Reduces underside reflections.
Easy to cut a super long material.
Control air volume.
co2 laser can’t cut through Tempered glass, protect your machine security.
Set speed, power, and more directly from the LCD panel.
High-speed Ethernet line or the USB cable line.
RDWorksV8 laser software.
Calculate working time
Working time preview.
Engrave high quality 3D photos directly.
5x open cover protection
Laser will stop working if you open the front cover.
Turn off the machine immediately when there is an accident.
Heat alarm detector
The heat detector customized by Thunder Laser has the accurate judgment of the abnormal temperature.
Show the work state and tell when the job is done, more safe for you.
Laser will stop working if the water cooling system is not working
Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving
There is an internal circuit breaker to protect the instrument from overload.
keep the temperature to ensure the stability of laser working.
Blowing air to prevent the material being burned
Ensure the work pieces and laser cutter machine inside be clean.
|Laser System||Mini 60|
|Working Area||23.6“x 15.7“ (600 x 400 mm)|
|Max Part Size (W x L x H)||Door Closed||
27.6“x 20.9“x 0.6“ (700 x 530 x 15mm)
27.6“ x ∞“ x 0.6“ (700 x ∞mm x 15 mm)
|Table Size||27.6“x 20.9“ (700 x 530mm)|
|Dimensions(W x D x H)||1100x830x660mm|
|Net Weight||110kgs (240lbs)|
|Laser Type||40W Sealed Co2 Glass Laser Tube|
|Motion Control System||High-Speed Stepper Motors|
|Maximum Speed||600mm/S(23.6 IPS)|
|Speed and Power Control(engraving depth)||
Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
|Operating Modes||Optimized raster, vector, and combined mode|
|Resolution(DPI)||User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)|
|Computer Interface||Ethernet and USB Connection|
|Compatible Operating Systems||Windows, Mac, and Linux (Mac and Linux with LightBurn Software)|
|Buffer Memory||128MB Standard|
|Display Panel||3.5″ LCD panel showing current file, total working time, laser power, speed, etc…|
|Electrical Requirements||110VAC 60 Hz, single-phase, 15-25A Depending on model|
|Ventilation System||Integral exhaust fan. There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.|
|Max Work Height||6” / 15.24 mm|
|Max. Speed||RASTER: 23.6”/sec. (600 mm/sec) VECTOR: Varies with job|
|Workpiece table||Solid metal blades & Honeycomb table|
|Max. table load||20kg / 44lbs|
|Standard Head||2.0” (50.8mm)|
If your material is not in the below list, our Applications Team would be happy to assist you to test it.
* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.
How to choose a reliable laser cutterWATCH NOW
How to setup your nova laser cutterWATCH NOW
DPES Sign Fair with Thunderlaser in 2016WATCH NOW
How to install HR headWATCH NOW
Auto focusWATCH NOW
How the Mars Motorized table worksWATCH NOW