Making a difference for our customers

Sales Email: sales@thunderlaser.com
 Tech Email: tech@thunderlaser.com

troubleshooting troubleshooting
Location:Home > troubleshooting > Why the starting point of a cutting graphic can’t meet with its end point
Image-1

Thunder Laser Video


How to choose a reliable laser cutter

WATCH NOW
▷ How to choose a reliable laser cutter
Image-1

Thunder Laser Video


How to install HR head

WATCH NOW
▷ How to install HR head

Why the starting point of a cutting graphic can’t meet with its end point

Release Time:2016/05/19 troubleshooting Browsing Times:2053

This problem is due to the different movement of the belt on both sides of the Y-axis, which lead the belt is not synchronized.

1. The coupling loose

2. The gear of transmission shaft loose


1. The coupling loose;

① Please check if one of couplings is loose like below:

01

If yes, please tighten it in clockwise with M5 Allen wrench.


2. The gear of transmission shaft loose

Please check which side of gear of transmission shaft is unfixed like below:

01

If the gear loose that mean the transmission shaft module is bad please contact with us.


Besides,there are another ways to improve the cutting problem by adjusting software.

1. Reduce the User setting of Go Acc factor and Speed factor to minimize the impact Like below:

01

If nothing,please follow next step to tick the option of “Backlash reapy optim”

2. An option of software for optimizing that problem.

Like below:

01

Then re-download the file to laser machine and test again.

If the problem cannot be solved, please contact our tech team by email: tech@thunderlaser.com