Laser wood cutting – cutting a Shuriken

July 26, 2022


Fuhma Shuriken is one of the special weapons used by Ninja in the hot Japanese cartoon – Naruto.The hot shot Sasuke is quite good at using this weapon. Now let’s make one for ourselves by using a Thunder laser cutter.

laser cutter file:Download

Required items:

3mm plywood

4” laser head

Thunder laser used:

Model: Mars 130

Laser Tube: 100 watt


Processing Mode: cut

Speed: 5mm/s

Max power: 75%

Min power: 75%

The settings are only for reference, users need to find the best setting by testing.


After we design the file in CorelDraw, we send the file to laser software directly by clicking the laser plug-in. Then we input the best setting parameters and “Download” the file to the laser cutter.


Place the wood sheet on the machine working table, move the laser head to the right start position, adjust the focal distance, press “Origin” button to set the starting point, then press “Start” to run the job.


After the laser machine finish working, you can take out your FuhmaShuriken.

Thrive with THUNDER LASER Now