02-How to Change the Size of an Object

Laser cutter software RDworks v8 tutorial 02 How to Change the Size of an Object

Today we’re going to show you how to change the size of an object. Select the object first, and then input the size of the object then press “Enter” to confirm.

Let’s input 150 and we can see that the width of the object has been changed.Now input 160 to change the height. If you would like to change the size in equal proportion, you need to tick the lock first. Then whether you change the width of the height, both will be changed in equal proportion.

We usually use Nova35 laser equipment to process this design.

First of all, we need a plywood board with a thickness of 3mm and a thickness of 30x30cm. We need to adopt the processing sequence of engraving first and then cutting.

The recommended parameters are:

laser engraving 500mm/s 20% power

laser cutting 50mm/s 80% power.

It should be noted that we can use a small blow when carving, which can provide the clarity of carving. Use a strong blow before cutting to get a clean edge.

And that’s all for today. See you.