![Eiffel tower](https://cdn.thunderlaser.com/upload/sample-club/2/t1.jpg)
laser cutting machine is widely used for cutting wood model; this time, Thunder laser will cut the Eiffel tower model!
laser cutter file:Download
Required items:
Material:3mm plywood
Laser head:standerd head
Thunder laser used:
Model: Nova 35laser cutter machine
Laser Tube: 80 watt
Setting:
Processing Mode: cut
Speed: 20mm/s
Max power: 60%
Min power: 70%
The settings are only for reference, users need to find the best setting by testing.
![Eiffel tower](https://cdn.thunderlaser.com/upload/sample-club/2/t2.jpg)
After we design the file in CorelDraw, we send the file to laser software directly by clicking the laser plug-in. Then we input the best setting parameters and “Download” the file to the laser cutter.
![Eiffel tower](https://cdn.thunderlaser.com/upload/sample-club/2/t3.jpg)
Place the wood sheet on the machine working table, move the laser head to the right start position, adjust the focal distance, press “Origin” button to set the starting point, then press “Start” to run the job.
![Eiffel tower](https://cdn.thunderlaser.com/upload/sample-club/2/t4.jpg)
After the laser cutter finish working, take out the Eiffel tower pieces and put them aside.
![Eiffel tower](https://cdn.thunderlaser.com/upload/sample-club/2/t5.jpg)
![Eiffel tower](https://cdn.thunderlaser.com/upload/sample-club/2/t6.jpg)
Build the Eiffel tower by yourself, you’ll find there’s a lot of fun to do it.