Laser for you to find Darth Vader Fighters

In this techie world, we believe many boys are sound is technology and its time to reveal their originality” DARTH VADER FIGHTERS” .Today we share about the laser cutting machine to cut the “DARTH VADER FIGHTERS. We request you to spend your precious time to see the video in the link and give us your valuable feedback to improve us.

laser cutter file：download

Required items:

Material:3mm plywood

Laser head:standerd head

Thunder laser used:

Machine:Nova35 80watt

Setting parameters:

Processing Mode:

Cutting speed:20mm/s Cutting power:50%~55%

This setting is for reference only,you need to find the best setting parameters by testing.

You can draw on CorelDraw and then click on the laser plug-in to switch to the laser software. Set the appropriate parameters on the laser software and click Download to transfer the design to your machine.

Place the plywood on the work table of the machine, move the laser head to the proper position, adjust the focal length, press the “Origin” on the LCD control panel to set the starting position, and then press the “Start” to start the work.

When the machine is finished, take out the parts of Darth Vader Fighters and put them aside

After this simple assembly,you may surprised to see the Darth Vader Fighters!