Complete Your Laser Workshop with Thunder Air Fume Extractor. Learn More
Application

WHAT ARE YOU LOOKING FOR?

Search Across Products, Blog Posts, Support Content, And Resources.

Search

Wedding Invitation

2026-11-09

Key Information

Laser Machines
Material Needed
5mm Plywood
Project File Download
Software Used
Compatible Software
Setting 1
Engraving
Speed: 3000mm/s
Max Power: 90%
DPI: 300
Air Assist: LOW
Setting 2
Cutting
Speed: 18mm/s
Max Power: 100%
Min Power: 10%
Air Assist: HIGH

Introduction

A wooden wedding invitation gives the traditional invitation format a more dimensional, keepsake-style presentation. Names, dates, venue details, and floral artwork can all become part of the finished design.


This project combines engraving and cutting on 5mm plywood. Engraving creates the couple's names, wedding date, venue information, and floral or wreath-style decorative graphics, while cutting forms the outer invitation shape and delicate openwork details.


Because this project uses thicker 5mm plywood, keeping the sheet completely flat is especially important before cutting. Secure it firmly with honeycomb pins so the material stays stable throughout both the engraving and cutting stages.


You can personalize the layout with different names, dates, typography, floral motifs, borders, or wedding themes to create invitations for ceremonies, receptions, save-the-date keepsakes, or special guest presentations.

Before your work begins

Make sure the Thunder Titan Pro 35 is connected and operating normally before loading the project
Prepare a clean, dry, and completely flat 5mm plywood sheet and secure it firmly with honeycomb pins
Check that the text and decorative graphics are assigned to Engraving and the outer contours and openwork are assigned to Cutting
Prepare a soft-bristle brush for removing loose dust from the engraved and cut areas after processing

Operational Process

STEP01

Prepare & Secure the 5mm Plywood

Place the 5mm plywood flat on the Titan Pro 35 honeycomb bed. Check the entire sheet for bowing or raised edges before starting, as an uneven surface can affect both focus consistency and cutting performance.


Use honeycomb pins to secure the plywood firmly against the work surface. Make sure the board stays completely flat, and position the pins outside the invitation design so they do not interfere with the engraving or cutting paths.

place flat 5mm plywood on the Titan Pro 35 laser bed for a wedding invitation
secure 5mm plywood with honeycomb pins before laser cutting and engraving a wedding invitation
STEP02

Import the Design & Set Engraving and Cutting

Import the wedding invitation design into LaserMaker and adjust the size and layout as needed. Create two process layers so the engraved information and cut geometry can be controlled separately.


Set Layer 1 to Engraving. Choose Plywood as the Material Type and set the thickness to 5.00mm. Set Speed to 3000mm/s, Max Power to 90%, DPI to 300, and Air Assist to Low. Use this layer for the couple's names, wedding date, venue information, and floral, branch, or wreath-style decorative artwork.


Set Layer 2 to Cutting. Set Speed to 18mm/s, Max Power to 100%, Min Power to 10%, and Air Assist to High. Use this layer for the invitation's outer contour and all openwork details. Review both layers before sending the job to the machine.

set engraving and cutting parameters for a 5mm plywood wedding invitation in LaserMaker
STEP03

Set the Correct Laser Focus

Set the laser focus on the top surface of the 5mm plywood before processing. Use the Titan Pro 35 autofocus function for a quick setup or confirm the focal position manually.


After focusing, check the plywood again and make sure it remains completely flat and firmly secured. This is especially important with 5mm plywood because variations in board height can affect the engraving result and the consistency of the final cut.

Titan Pro 35 autofocus before engraving and cutting a 5mm plywood wedding invitation
manual focus on Titan Pro 35 before processing a 5mm plywood wedding invitation
STEP04

Frame, Engrave & Cut the Wedding Invitation

Run the Frame function first to preview the complete engraving and cutting range. Confirm that the entire invitation fits within the plywood sheet and that the outer contour and openwork details have enough clearance from the board edges and honeycomb pins.


Once the Frame position is correct, begin with the Engraving layer. The laser engraves the couple's names, wedding date, venue information, and floral or wreath-style artwork while the plywood remains fully supported.


After engraving is complete, run the Cutting layer. The laser follows the outer contour and openwork paths to release the finished invitation from the 5mm plywood. Keep the board flat and secured until the entire cutting process has finished.

Frame the wedding invitation design before engraving and cutting 5mm plywood
Titan Pro 35 engraving names dates and floral patterns before cutting a plywood wedding invitation
STEP05

Clean, Inspect & Display the Invitation

Remove the finished invitation carefully and use a soft-bristle brush to clear loose dust from the engraved lettering, floral patterns, outer edges, and openwork sections.


Inspect the cutout details and engraved text to make sure the delicate patterns are complete and the names, date, venue information, and decorative edges remain clean and intact.


Once the surface is clean, place the completed wedding invitation flat for the final presentation. The engraved information and cut details should be clearly visible across the finished design.

finished laser cut and engraved wooden wedding invitation displayed flat after cleaning

Come and Try!

The invitation is ready. What details will make yours feel personal to the celebration?


Try different names, wedding dates, venue details, typography, floral borders, wreaths, branches, or openwork patterns to match the style of the ceremony. The same workflow can also be adapted for save-the-date pieces, table stationery, and commemorative wedding keepsakes.


For more personalized wedding projects, decorative woodwork, and laser-cut stationery ideas, explore Thunder Titan Pro or contact us to find a laser solution for custom products and production workflows.

An-industrial-grade-high-power-laser-machine–Titan-63-100W-1536x1152.webp

Titan Pro Series

Learn more about our Industrial dual laser machines.

lasermaker

Smart Software LaserMaker

All the easy-to-follow LaserMaker tutorials are right here!

Material Settings Library

Find recommended material settings for your laser machine.

Projects You May Also Like

Share. Connect. Get Inspired.

Your Creativity Fuels Our Community—let's Build Something Amazing Together!

Share on Social Media

Post your laser project and tag @thunderlaser.official to get featured.

Join Thunder Family

Learn, share, and get real support from the community.

Follow for More Ideas

Stay tuned for tutorials, material tips, and latest news.

Ready for Your Next Creation?

Ready to take the next step? Explore more tutorials or find the right machine for your work.

We use cookies to understand how our audience uses our site.
THUNDER LASER websites use cookies to deliver and improve the website experience, See our cookie policy for further details on how we use cookies and how to change your cookie settings Cookie policy.
Accept
Reject
close