Laser Cutting - Christmas Desktop Decor

Introduction

With Christmas just around the corner, our homes start to sparkle with lights and ornaments. Yet sometimes, the table still feels a little empty—missing that special festive touch to bring everyone together.

This laser-cut Christmas desktop decoration helps you gather your family, follow the steps together, and enjoy the fun of assembling the pieces. Each layer and slot fitting perfectly into place brings a sense of accomplishment, and the finished decoration adds a warm, festive touch to your home. Make it a small holiday tradition, and let everyone take part in creating a piece that brightens your space and your hearts.

Machine Used

Thunder Bolt 30W

See more details about this machine→

Material Needed

3mm Plywood

Settings

Cutting

Speed:10mm/s
Max Power:25%
Min Power:10%
Number of Passes:1
Shallow Engraving
- Speed:500mm/s
- Power:20%
- DPI:300

Before your work begins

Step 1: Place the Wood on the Laser Bed

Start by laying your wooden board flat on the laser bed. Make sure the surface is clean and sits evenly without warping. If needed, use magnets or light tape at the edges to keep the board from shifting during cutting.

Tips:

There are three common types of pins: T-shaped, L-shaped, and F-shaped. A special use for F-shaped pins is clamping up the plywood to prevent burn marks. Be mindful of the height of the magnets and pins. If they are too tall, the sensor might hit them and become damaged during processing.

Step 2: Open the File and Check the Settings

Open your laser software(I use LaserMaker) and import the Christmas desktop decor design file. Adjust the layout so it fits properly within your material size. Before moving on, double-check your engraving and cutting parameters to match the thickness and type of wood you’re using.

Step 3: Focus Your Laser Machine

Proper focusing ensures neat, polished edges. If your machine has auto focus, use it for quick setup. For manual focusing, lower the laser head with the focus stick until it touches the wood surface at a perfect angle. Always double-check before cutting.

Step 4: Frame the Design and Start Laser Cutting

Then click “Frame” or “Border” to preview your cutting area and make sure the design fits nicely on your board. This confirms your material placement and avoids wasting wood. Adjust as necessary. Once everything is set, start the laser job.

Step 5: Monitor the Laser Cutting Process

Stay close to the machine while it’s running and watch the cutting and engraving progress. Keep an eye out for excessive smoke, small flame-ups, or any movement of the material that could affect the outcome. Make sure your workspace is well-ventilated, and rely on air assist if available to achieve cleaner edges on the wood.

Step 6: Assemble the Decor

Carefully remove the cut pieces from the laser bed. Align tabs, slots, or layers as per the design. The decoration should fit together smoothly without glue for acrylic interlocks, or with minimal adhesive for layered wood pieces.

Step 7: Complete the Task

Your Christmas wall decoration is now complete. Hang it on a wall, above a mantel, or near the entrance to instantly bring festive charm into your space.

Come and Try!

Christmas decorations feel extra special when you’ve made them yourself. This project is simple enough to enjoy in an afternoon, yet meaningful enough to become part of your holiday tradition. Turn on your laser cutter, pick your favorite festive design, and create a desktop decoration that fills your home with warmth, creativity, and Christmas spirit