Halloween Pumpkin Candy Baske
2026-09-27
Products
Produkt kategorie
Bolt-Serie
Professionelle Lasergraviermaschine für hochpräzise Ergebnisse
Nova-Serie
Großformat-CO₂-Laserschneider mit Glasröhre
Nova Plus-Serie
Professionelle RF-CO₂-Laserschneidmaschine
Titan-Serie
Industrielles RF-CO₂-Lasersystem
Titan Pro-Serie
Industrielles Lasersystem mit RF-CO₂- und MOPA-Faserlaser
Anwendung
Klassifizierung
WAS SUCHEN SIE FÜR?
Suche über Produkte, Blog-Beiträge, Support-Inhalte und Ressourcen.
2026-09-27
Key Information
Laser Machines
Material Needed
5mm Plywood
Project File Download
Software Used
Tested by
Thunder Laser Application Team
Setting 1
Shallow Engraving
Speed: 800mm/s
Max Power: 30%
Min Power: 5%
Passes: 1
Setting 2
Cutting
Speed: 10mm/s
Max Power: 50%
Min Power: 10%
Introduction
A wooden pumpkin candy basket brings a little extra Halloween character to the usual trick-or-treat setup, with enough personality to work as both a candy holder and seasonal décor.
This project combines shallow engraving and laser cutting on 5mm plywood. Engraved pumpkin details add depth and expression to the design, while the cut panels form the basket structure for holding wrapped candy and small Halloween treats.
Place it by the front door for trick-or-treat night, use it on a party table, or make several versions with different pumpkin faces and decorative details for a coordinated Halloween display.
For more plywood projects, explore our laser engraving and cutting plywood guide. You can also learn more about the Thunder Bolt Series.
Before your work begins
Make sure the Thunder Bolt is connected and operating normally
Prepare a clean, dry, and flat 5mm plywood sheet
Check that the shallow engraving details and cutting outlines are assigned to the correct layers
Review the basket parts and their orientation before processing so assembly is easier afterward
Operational Process
STEP01
Prepare & Position the Plywood
Place the 5mm plywood flat on the Thunder Bolt laser bed and check that the sheet is clean, dry, and free from noticeable warping.
Use honeycomb pins to keep the plywood securely against the work surface. Position the pins outside the pumpkin basket layout so they do not interfere with the engraved details or cutting paths.
STEP02
Import & Adjust the Halloween Design
Import the Halloween Pumpkin Candy Basket design into LaserMaker and arrange all basket pieces within the usable plywood area.
Assign the pumpkin face, surface details, and decorative lines to the shallow engraving layer. Assign the outer profiles, joints, handles, and structural parts to the cutting layer, then check the size and placement of every component before processing.
STEP03
Set the Correct Laser Focus
Set the laser focus on the top surface of the 5mm plywood before starting the Halloween basket project. Use the Thunder Bolt autofocus function for a quick setup or confirm the focal position manually.
Keep the plywood flat after focusing so the working distance stays consistent across the pumpkin details, basket panels, handle pieces, and cutting outlines.
STEP04
Frame the Design & Start Processing
Run the Frame function to preview the complete processing area and confirm that every part of the pumpkin candy basket stays within the plywood sheet.
Check the clearance around the pumpkin panels, handle, decorative details, and connecting parts. Once the Frame position is correct, keep the plywood in place and start the engraving and cutting process.
STEP05
Assemble the Pumpkin Candy Basket
Remove the finished pieces from the laser bed and identify the front, back, side, base, and handle components before beginning assembly.
Fit the basket pieces together according to the design, keeping the engraved pumpkin faces and Halloween details facing outward. Check each connection as you go so the basket sits evenly and the handle is positioned securely.
Once assembled, your wooden pumpkin basket is ready for wrapped candy, chocolate, or small Halloween treats. Place it by the front door for trick-or-treaters or use it as a centerpiece for a spooky party table.
Come and Try!
The pumpkin basket is ready. Now all it needs is candy before the doorbell starts ringing.
Try changing the pumpkin face, adding bats, ghosts, cobwebs, names, or a short Halloween message to create a basket that fits your own spooky setup.
For more Halloween laser projects, wooden candy holders, and seasonal plywood décor, explore Thunder Laser machines or contact us to find the right laser cutter for custom decorations, party projects, and seasonal creations.
Projekte, die Sie möglicher weise auch mögen
Share. Connect. Get Inspired.
Your Creativity Fuels Our Community—let's Build Something Amazing Together!
Share on Social Media
Post your laser project and tag @thunderlaser.official to get featured.
Join Thunder Family
Learn, share, and get real support from the community.
Follow for More Ideas
Stay tuned for tutorials, material tips, and latest news.
Bereit für deine nächste Schöpfung?
Bereit für den nächsten Schritt? Entdecken Sie weitere Tutorials oder finden Sie die richtige Maschine für Ihre Arbeit.
Stable & Consistent MachinesUnlimited ApplicationRobust After-sales SupportFactory Direct Supply
KONTAKTIEREN SIE INFO
Name*
E-Mail*
Telefon nummer*
Land*
Details zur Anfrage*
Ich habe gelesen und stimme zu, Thunder Laser Datenschutz richtlinie Und Haftung ausschluss.
Select your country/region
International
America
European
Africa
Contact Info
Name*
E-Mail*
Telefon nummer*
Land*
Name des Unternehmens/der Organisation*
Webseite/Social Media Links*
Follower Count*
Inhalts typ*
Haben Sie eine Donner-Laser-Maschine?*
Erzählen Sie uns mehr über Sie*
Ich habe gelesen und stimme zu, Thunder Laser Datenschutz richtlinie Und Haftung ausschluss.