Laser Marking - Easter Rabbit Keychain

Introduction

A small keychain can carry more than just keys—it can reflect personality, memories, or even a festive moment. For Easter, a bunny-themed stainless steel keychain is a simple yet meaningful piece you can use every day or give as a thoughtful gift.

In this tutorial, you’ll learn how to laser mark a clean and durable Easter bunny design onto a stainless steel keychain. The process is straightforward and beginner-friendly, guiding you step by step from setup to the final result.

Machine Used

Aurora Lite
More details about Aurora Lite→

Material Needed

Stainless Steel Keychain

Settings

Laser Marking-Black

Speed: 100 mm/s
Max. Power: 14%
Defocus: 3mm
Frequency: 60 kHz
Line interval: 0.01
Passes: 3

Laser Marking-Yellow

Speed: 267 mm/s
Max. Power: 30%
Defocus: 3mm
Frequency: 60 kHz
Line interval: 0.01
Passes: 1

Check out!

Step 1: Place the Keychains on the Laser Bed

Start by placing your stainless steel keychain blank onto the laser bed. Make sure the surface you want to mark is facing upward and is completely clean. Any fingerprints, dust, or oil on the surface can affect the marking result, causing uneven color or reduced clarity.

Because keychains are small and lightweight, stability is especially important. Position the keychain so it sits flat and does not move. If needed, you can place it against a fixed edge or use a simple jig to keep it in place. You can also place a thin wooden board underneath to protect the laser bed in case of misalignment.

Taking a few extra seconds to secure the material properly will help ensure your bunny design comes out sharp and centered.

Step 2: Import the Laser Mark File

Open your laser software and import the prepared design. Position the design in the center of the marking area and then confirm that the marking layer settings are correct. Simple designs usually produce the cleanest results on stainless steel surfaces.

PRO TIP

New to laser marking stainless steel? Our in-depth guide explains the process, settings, and best practices in detail.

Step 3: Focus the Laser

Set the focus precisely on the top surface of the medal. Accurate focus is essential for achieving smooth transitions and well-defined layers in 3D marking.

Auto focus

Manual focus

Step 4: Run a Frame Test

Use the frame or outline function to preview the laser marking area. This helps confirm alignment and prevents the design from marking outside the slate.

Step 5: Monitor the Marking Process

Start the laser marking process and stay nearby while the machine is running. The laser will interact with the stainless steel surface to create a permanent mark, forming the bunny design and any additional details.

As the process runs, observe the marking quality. The lines should appear clear and consistent. Make sure the keychain does not move and that ventilation is working properly to remove any fumes.

Avoid leaving the machine unattended. Even though marking is generally stable, staying present allows you to quickly respond if anything unexpected happens.

❗

While the machine is running:

Keep an eye on the marking progress
Ensure the bowl remains stable
Make sure ventilation is working properly

Step 6: Complete the Laser Marking

Once the marking is finished, allow the keychain to cool for a short moment before touching it. Stainless steel can retain heat after laser processing, and this helps prevent accidental burns.

After it has cooled, gently wipe the surface with a soft cloth to remove any residue or dust. This will reveal the final design more clearly and restore the natural shine of the metal.

Your Easter bunny keychain is now complete. The marking is permanent, durable, and resistant to everyday wear, making it perfect for daily use.

Come and Try!

A simple keychain can become something personal with just a small design. Try adding a bunny, a name, or a short message and create a piece that fits the Easter mood—easy to make, and something you can carry with you every day.