Laser Engraving – Custom Lyric CD Decor

1月 27, 2026

Introduction

Some songs capture a moment, a memory, or a relationship better than words ever could. Turning meaningful lyrics and a couple’s names into a physical keepsake makes that memory last even longer.

In this tutorial, you’ll learn how to create a CD-inspired decorative piece using laser engraving and cutting. By combining engraved wood with gold mirror acrylic, you can transform a favorite song into a timeless, display-worthy design—simple, elegant, and full of meaning.

Machine Used

Thunder Bolt 30W

See more details about this machine→

Material Needed

3mm Plywood
3mm Gold Mirror Acrylic Sheet

Settings

Engraving & Scoring Plywood

Speed:800mm/s
Power:25%
DPI:300

Engraving Acrylic

Speed:800mm/s
Power:20%
DPI:300

Cutting Plywood & Acrylic

Speed:10mm/s
Max Power:25%
Min Power:10%

Before your work begins

Step 1: Place the Materials

Place the plywood and the gold mirror acrylic sheet flat on the laser bed. Make sure both materials are clean, secure, and properly positioned to prevent movement during engraving and cutting.

Step 2: Import the Design File and Check the Settings

Open your preferred laser software (I used Lasermaker) and import your design file. Adjust the size and positioning to match your materials. Double-check which elements are set for engraving and which are set for cutting.

Step 3: Focus Your Laser Machine

Proper focusing is essential for achieving detailed engravings. If your machine supports auto focus, a single click will set the correct distance. If you prefer manual focus, use the focus stick to adjust the laser head until it just touches the surface of the mirror at a perfect vertical angle. Spending an extra moment on accurate focusing will pay off with professional-looking results.

Step 4: Frame the Design and Start Laser Engraving

Use the framing (Border) function to check the engraving area. This helps confirm that the design is positioned correctly and won’t exceed the material boundaries.

Step 5: Monitor the Laser Engraving Process

Stay near the machine while it’s running and watch the cutting and engraving progress. Keep an eye out for excessive smoke, small flame-ups, or any movement of the material that could affect the outcome. Make sure your workspace is well-ventilated, and rely on air assist if available.

Step 6: Bond the Acrylic to the Wood

Once processing is complete, carefully remove the pieces from the laser bed. Align the engraved gold mirror acrylic with the engraved wooden base, then use a suitable adhesive to bond the acrylic onto the wood. Press gently to ensure proper alignment and secure adhesion.

Step 7: Complete the Laser Task

Allow the adhesive to fully set. Your custom lyric CD decor is now complete and ready to display.

Come and Try!

Choose a song that means something to you, add names, dates, or a short message, and turn music into a lasting visual memory. Whether it’s for a special occasion or simply to celebrate a shared moment, this laser-engraved CD-style decor is a beautiful way to let meaningful lyrics live on beyond the music. Give it a try and create something truly personal.

More Posts

Laser Marking – Brass Christmas Stamp

Laser Engraving-Slate Coaster

Laser Engraving – Owl Pillowcase

Car model making|Laser Cutting for Cars Model

Thrive with THUNDER LASER Now