Color Laser Engraving - | Thunder Laser

Introduction

Color laser engraving brings the monsters parade to life! Get ready to turn your titanium plate into a vibrant playground of quirky, colorful monsters with color laser engraving! Each design is permanently engraved with bold hues that shift under different lights, creating a dynamic and eye-catching effect.

Ready to unleash your own Monsters Parade? Follow the steps below and let’s make your masterpiece come to life!

Machine Used

Aurora Lite 50W

See more details about this machine→

Material Needed

Titanium Plate

Settings

Color Laser Engraving

Speed: multi
Marking Power: multi
Frequency: multi
Line Interval: multi

1. Before Your Work Begins

2. How to Achieve Perfect Results on Titanium Plates

Color laser engraving on titanium plates is a precise process that demands careful attention at every stage. From placing the plate to adjusting the focus and settings, each step is crucial for achieving the best results. Let’s walk through the process, step by step, to ensure a flawless engraving.

2.1. Step 1: Place the Titanium Plate

Put the titanium plate on the laser bed. Since it is flat in the center, the titanium plate will be suited well for laser engraving.

2.2. Step 2: Import File and Check Out

Load your design into LightBurn software, adjusting its size and position to fit your titanium plate. Then make sure the color laser engraving parameters are set correctly.

The parameters in our documents are for reference only, the actual results are affected by different batches and manufacturers of titanium plates.

2.3. Step 3: Remember to Focus

Missing the focus is one of the biggest reasons for failure. So don’t forget to click the AF button for auto focus.

Of course, manual focus is also effective. Hang the focal stick at the correct position under the lens, and then carefully adjust the Z-axis height. When the end of the focal stick just touches the surface of the titanium plate, it is in focus!

Auto Focus

Manual Focus

Focal Stick of Manual Focus

Adjust the Z-Axis Height

2.4. Step 4: Ready to Start Color Laser Engraving

Press the frame button and check if the visual red light indicate the right area to be color laser engraved. The frame should be located in the middle of the titanium plate. If not, move the pattern positions until they align.

After checking, close the laser door and begin Aurora Lite’s operation.

2.5. Step 5: Monitor the Titanium Plate for Color Laser Engraving

Stay near the laser machine throughout operation to monitor for any unusual sounds or alarms. This door ensures safety during processing, as the energy is potent. Avoid looking directly at the laser beam, even with protective measures in place.

2.6. Step 6: Complete the Color Laser Engraving Task

Once the engraving procedure is complete, carefully open the door and get your personalized titanium plate.

The colors on the titanium plate are created through controlled heat application, with the color pattern shifting to reveal different shades when viewed from different angles or under varying light conditions, offering a dynamic and captivating experience.

Conclusion

A laser engraving for color titanium plate is a blend of style, function, and personal expression. Whether for daily use or as a meaningful gift, its sleek design and lasting engraving make it truly special. With color laser engraving, you’re not just adding a design—you’re making it yours.