Complete Your Laser Workshop with Thunder Air Fume Extractor. Learn More
Application

WHAT ARE YOU LOOKING FOR?

Search Across Products, Blog Posts, Support Content, And Resources.

Search

Halloween Napkin Holder

2026-11-09

Key Information

Laser Machines
Material Needed
3mm Plywood
Project File Download
Software Used
Compatible Software
Setting 1
Cutting
Speed: 10mm/s
Max Power: 30%
Min Power: 10%
Passes: 1
Air Assist: HIGH

Introduction

This Halloween napkin holder turns an everyday table accessory into part of the seasonal décor. A pointed-hat witch, broom, moon, bats, and other Halloween silhouettes form the decorative structure around the napkins.


The entire design is made with contour cutting on 3mm plywood. There is no engraving or scoring in this project: the witch, broom, decorative openings, skirt ring, and connecting slots are all created as cut outlines.


After cutting, the circular skirt section slots into the witch body to form a freestanding holder. Add folded napkins and the fan-shaped wooden skirt opens visually around them, making the finished piece suitable for Halloween dinners, party tables, cafés, or seasonal displays.


For more ideas for working with plywood, explore our plywood laser cutting guide. You can also learn more about the Thunder Bolt Series.

Before your work begins

Make sure the Thunder Bolt is connected and operating normally before loading the project
Prepare a clean, dry, and flat 3mm plywood sheet and secure it firmly to the honeycomb bed
Check that all witch, broom, moon, bat, slot, and outer contour elements are assigned to the Cutting layer in LaserMaker
Check the slot positions and assembly orientation before starting the machine so the finished pieces fit together correctly

Operational Process

STEP01

Prepare & Secure the Plywood

Place the 3mm plywood flat on the Thunder Bolt honeycomb bed. Check that the sheet is clean, dry, and free from noticeable warping before starting the cutting job.


Use honeycomb pins to hold the plywood securely against the work surface. Keep the pins outside the planned cutting area so they do not interfere with the witch, broom, moon, bat, skirt, or slot outlines.

place 3mm plywood on the Thunder Bolt laser bed for a Halloween napkin holder
secure 3mm plywood with honeycomb pins before laser cutting a Halloween napkin holder
STEP02

Import the Design & Set the Cutting Parameters

Import the Halloween Napkin Holder design into LaserMaker and arrange the parts within the usable plywood area. Keep the witch body, pointed hat, broom, moon, bats, fan-shaped skirt ring, connecting slots, and other decorative outlines as vector cutting paths.


Select Cutting for the Layer, choose Plywood as the Material Type, and set the thickness to 3.00mm. Set Speed to 10mm/s, Max Power to 30%, Min Power to 10%, Processing Times to 1, and Air Assist to High. Confirm that every visible design element is assigned to cutting rather than engraving or scoring.

set the 3mm plywood cutting parameters for a Halloween napkin holder in LaserMaker
STEP03

Set the Correct Laser Focus

Set the laser focus on the top surface of the 3mm plywood before cutting. Use the Thunder Bolt autofocus function for a quick setup or confirm the focal position manually.


Keep the plywood flat and secured after focusing so the working distance remains consistent across the detailed witch silhouette, narrow broom handle, decorative openings, and assembly slots.

Thunder Bolt autofocus before laser cutting a 3mm plywood Halloween napkin holder
manual focus on Thunder Bolt before cutting a plywood Halloween napkin holder
STEP04

Frame the Design & Start Cutting

Run the Frame function first to preview the complete cutting range. Confirm that the entire Halloween design stays within the plywood sheet and that the outer contours and smaller cutouts have enough clearance from the sheet edges and honeycomb pins.


Once the Frame position is correct, keep the plywood in place and start the cutting job. The laser follows the vector paths to cut the witch silhouette, pointed hat, broom handle, moon, bats, skirt ring, connecting slots, and other structural details from the plywood.

Frame the Halloween napkin holder design before laser cutting 3mm plywood
Thunder Bolt laser cutting the witch silhouette and broom handle for a Halloween napkin holder
STEP05

Assemble & Fill the Halloween Napkin Holder

After cutting, remove the parts from the laser bed and identify the witch body and fan-shaped skirt ring. Align the slot in the skirt ring with the matching slot in the witch body, then slide the pieces together and press them into position to form the freestanding structure.


Check the interlocking connection and adjust the pieces until the holder stands firmly and the skirt ring sits evenly around the witch body.

insert the fan-shaped skirt ring into the witch body to assemble a Halloween napkin holder
finished Halloween witch napkin holder shown empty and filled with white napkins

Insert folded napkins around the body so they spread through the circular holder and open into a fan-shaped skirt. Arrange the napkins evenly, then place the finished holder on a dining table, party buffet, café counter, or Halloween display.

Come and Try!

The witch is ready for the table. Which napkin colors will you use for her Halloween skirt?


Try black, orange, purple, white, or patterned napkins to change the finished look. You can also adjust the cut silhouette with different bats, moons, stars, broom shapes, or other Halloween motifs while keeping the same slot-together structure.


For more laser-cut Halloween décor, table accessories, and creative plywood projects, explore Thunder Laser machines or contact us to find the right laser cutter for seasonal decorations and custom projects.

Thunder Bolt Series

Learn more about our high-performance RF CO₂ laser engravers.

lasermaker

Smart Software LaserMaker

All the easy-to-follow LaserMaker tutorials are right here!

Material Settings Library

Find recommended material settings for your laser machine.

Share. Connect. Get Inspired.

Your Creativity Fuels Our Community—let's Build Something Amazing Together!

Share on Social Media

Post your laser project and tag @thunderlaser.official to get featured.

Join Thunder Family

Learn, share, and get real support from the community.

Follow for More Ideas

Stay tuned for tutorials, material tips, and latest news.

Ready for Your Next Creation?

Ready to take the next step? Explore more tutorials or find the right machine for your work.

We use cookies to understand how our audience uses our site.
THUNDER LASER websites use cookies to deliver and improve the website experience, See our cookie policy for further details on how we use cookies and how to change your cookie settings Cookie policy.
Accept
Reject
close