1000mm/s speed for engraving photo, super smooth vector cutting quality.
Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving
RDWorksV8 laser software.
Set speed, power, and more directly from the LCD panel.
Help the user to set focus Easier. (based on motorized table)
Control the table up/down from LCD panel directly
Honey comb table
Reduces underside reflections.
Aluminum blade cutting table
Reduce the influence of the reflection of laser.
Engrave high quality 3D photos directly.
Achieve “3D cutting” on some materials
Help you to save times.
Change the working speeds and power by using color settings.
Visible Red Dot Pointer
Make the laser beam “visible”.
High quality laser tube
Every laser tube must pass the strict quality control test.
High quality optics
High quality optics.
Thunderlaser easily re-adjusting 3D mirror mounts.
High-speed Ethernet line or the USB cable line.
USB disk interface
Thunder laser system supports the USB disk loading.
Free Home position
Freely change the starting position.
Large buffer memory
You can take the file directly from the memory.
Turn off the machine immediately when there is an accident.
Open flap protection
Laser will stop working if you open the front cover.
Laser will stop working if the water cooling system is not working
Show the work state and tell when the job is done, more safe for you.
Standard laser head
It is the most often used head.
Blowing air to prevent the material being burned
Ensure the work pieces and laser cutter machine inside be clean.
This belt is stable performance with long life, wearable and durable.
Low-noise cooling fan
Operate the laser in a quiet and comfortable surroundings.
High quality rails
Keep the engraving/cutting precise and very durable.
|Laser System||NOVA 35||NOVA 51||NOVA 63|
|Laser Tube Wattage||80-130Watt||100-130Watt||100-150Watt|
|Work Area||900x600mm(35.4″ x 23.6″)||1300x900mm(51.2″x35.4″)||1600x1000mm(63.0″x39.4″)|
|Max Part Size (WxLxH)||Front door closed||
1000x730x230mm(39.4″ x 28.7″ x9.0″)
1400x1030x230mm(55.1″ x 40.6″ x9.0″)
1700x1130x230mm(66.9″ x 44.5″ x9.0″)
1000x∞x20mm(39.4″ x ∞” x0.8″)
1400x∞x20mm(55.1″ x ∞” x0.8″)
1700x∞x20mm(66.9″ x ∞” x0.8″)
|Table Size||1000x730mm(39.4″ x 28.7″)||1400x1030mm(55.1″ x40.6″)||1700x1130mm(66.9″ x 44.5″)|
|Z Axis Height||230mm(9.1″)||230mm(9.1″)||230mm(9.1″)|
1500x1105x1040mm(59.1″ x 43.5″ x40.9″)
1900x1405x1040mm(74.8″ x 55.3″ x40.9″)
2200x1505x1040mm(86.6″ x 59.3″ x40.9″)
|Laser Type||Sealed Co2 Glass Laser Tube|
|Motion Control System||High-Speed Servo Motors|
|Maximum Speed||1000mm/S(39.4 IPS)|
|Speed and Power Control (engraving depth)||Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.|
|Operating Modes||Optimized raster, vector, and combined mode|
|Resolution(DPI)||User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)|
|Computer Interface||Ethernet and USB Connection|
|Compatible Operating Systems||Windows XP/2000/Vista/7/8/10|
|Buffer Memory||128MB Standard|
|Display Panel||3.5″ LCD panel showing current file, total working time, laser power, speed etc.|
|Electrical Requirements||110 to 240 volts, 50 or 60 Hz, single phase|
|Ventilation System||Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.|
If your material is not in the below list, our Applications Team would be happy to assist you to test it.
* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.
How to choose a reliable laser cutterWATCH NOW
How to setup your nova laser cutterWATCH NOW
DPES Sign Fair with Thunderlaser in 2016WATCH NOW
How to install HR headWATCH NOW
Auto focusWATCH NOW
How the Mars Motorized table worksWATCH NOW