Making a difference for our customers
+86 181 0304 3363

Sales Email: sales@thunderlaser.com
Tech Email: tech@thunderlaser.com

Tips tips
Location:Home > Tips > Thunder alser tips wood cutting
Image-1

Thunder Laser Video


How to choose a reliable laser cutter

WATCH NOW
▷ How to choose a reliable laser cutter
laser parametes

Thunder Laser Video


Laser Samples Parameters

WATCH NOW
▷ Laser Samples Parameters

Thunder alser tips wood cutting

Release Time:2020/11/13 Tips Browsing Times:66

 Focus ruler

When we use just the right power and speed to cut,there is no excessive charring of the cutting area.

 Focus ruler

As we reduce the cutting speed the charring of the cutting edges deepens.

 Focus ruler

As we increase the cutting power the charring of the cutting area also increases.

Our comparison shows that using too slow a speed and cutting at too high a power can result in more severe charring

 Focus ruler

Our comparison shows that using too slow a speed and cutting at too high a power can result in more severe charring

 Focus ruler

This will be more pronounced on boards of about 5mm.

 Focus ruler

 Focus ruler

 Focus ruler

 Focus ruler

When cutting thick materials, we have to use low speed and high power which results in severe charring of the cut To reduce the effects of cutting charring

 Focus ruler

To reduce the effects of cutting charring
1. select the high volume blowing mode to cutting

 Focus ruler

Better results can be obtained by cutting with a higher pressure air compressor.

 Focus ruler

2.Select the right cutting speed and power,The faster the speed, the less the charring effect. When cutting twice results in a more severe charring effect

 Focus ruler

3. We can wipe the edges of the material to reduce the effects of charring.

 Focus ruler