Odin – laser engraver - Thunder Laser

Odin – laser engraver

Thunderlaser New product in 2020, the Odin series is combined with small size, compact, high quality engraving and cutting at a low cost. With 3G acceleration and 80 IPS engraving speed provide a super fast engraving in the industry. And the RF tube allows fantastic beam signature and air cool, you don’t have to worry about freezing. The gantry payload is minimal and is super smooth.

Get the special $1,000 discount with code “EARLYBIRD” for your Odin order, for the first 20 customers only.

Get price

Brochure

Standard Features

New: 100% faster motor system

Japanese ORIENTAL 5 phase open-loop motor systems, with 3G acceleration and 80IPS engraving speed.

New: 100% smoother guide Rail

Patent guide rail developed by Thunder Laser, less resistance and low noise.

New: 1,000 DPI RF metal laser source

With excellent quality Beam output and stable laser power, lifespan up to 10,000 hours.

New: Upper & Lower Vent

To timely remove the heat from material surface.

Dual Air-Assist system

Adjusting air volume for cutting and engraving separately for different requirements

New:Eightfold Open-flap protection

Laser will stop if someone open any machine cover during working.

Newly-designed focus lens and mirror holder

Easier to clean and replace lens and mirrors, Lenses of different FL are swappable in the same mount.

New housing design

Compact, stand included,room for blower and compressor and space saved.

New Auto focus

No limitation for materials or working area, more accurate.

New:Drawer for collecting small working pieces

To make it easier to collecting small working pieces and cleaning up.

Smart board

Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving

Visible Red Dot Pointer

Make the laser beam “visible”.

Honeycomb table

Reduces underside reflections.

High quality power cable

The high-quality electrical connector has low and stable contact resistance.

Heat alarm detector

Heat alarm detector.

Emergency stop

Turn off the machine immediately when there is an accident.

Alarm Lamp

Show the work state and tell when the job is done, more safe for you.

Breaker

This is a protective conductor, included to prevent shock and/or fire.

Earth wiring

Earthing is used to protect you from an electric shock.

3D Engrave

Engrave high quality 3D photos directly.

3D cutting

Achieve “3D cutting” on some materials

Rotary plug

Work on round items such as tumbler,mug and bamboo pipe by laser cutting machine.

Exhaust system

Ensure the work pieces and laser cutter machine inside be clean.

Air assist

Blowing air to prevent the material being burned

Technical Specifications

Laser System		Odin 22
Laser Tube Wattage		30 Watt
Working Area		559 x 381 mm (22′ x 15′)
Table Size		625 x 440 mm (24.6′ x 17.3′)
Dimensions(W x D x H)		1030x860x1090mm (40″ x 34″ x 43″)
Laser Type		Radio Frequency Laser Tube
Cooling		Air Cooled
Maximum Speed		2000MM/S
Speed and Power Control		Computer or manually controlled speed and power from 0-100%.Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster,vector,and combined mode
Resolution(DPI)		User controlled from 100 to 500DP(standard laser head)
Computer Interface		Ethernet and USB Connection
Compatible Operating Systems		Windows, Mac, and Linux (Mac and Linux with LightBurn Software)
Buffer Memory		128MB Standard
Display Panel		3.5″ LCD panel showing current file, total working time, laser power, speed, etc…
Electrical Requirements		Requirements110 to 240 volts,50 or 60 Hz,single phase
Z-Axis Height		190mm (7.5″)
Net Weight		110kgs (240lbs)
Cooling		Water Cooled
Motion Control System		High-Speed Stepper Motors
Speed and Power Control(engraving depth)		Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster, vector, and combined mode
Ventilation System		Integral exhaust fan. There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.
Max Work Height		210 mm (8.2″)
Max. Speed		2000mm/s
Workpiece table		Solid metal blades & Honeycomb table
Max. table load		20kg / 44lbs

Machine Size

Optional Items

Rotary Axis
Rotary engraving equipment was used to extending THUNDERLASER system application, as a optional component, It can be used for cutting and engraving round items…

Air compressor
The high pressure and low noise air compressor offered by Thunder Laser co2 laser engraving machine includes two parts: the high pressure and low noise air compressor and the water separator…

Focus lenses
As a rule of thumb, the following applies to the focus lenses: the more detailed the graphics, the shorter the focal length in laser engraving. The thicker the material to be laser-cut, the greater the focal length should be. For this reason, Thunder offers you three different lenses for perfect results.

Materials

If your material is not in the below list, our Applications Team would be happy to assist you to test it.

Materials	Engrave	Cut
Wood	√	√
Acrylic	√	√
Delrin	√	√
Cloth	√	√
Leather	√	√
Mat Board	√	√
Melamine	√	√
Paper	√	√
Mylar	√	√
Pressboard	√	√
Rubber	√	√
Wood Veneer	√	√
Fiberglass	√	√
Plastic	√	√
Cork	√	√
Corian	√	√
Twill	√	√
Anodized Aluminum	√	X
Painted Metals	√	X
Tile	√	X
Glass	√	X
Coated Metals	√	X
Ceramics	√	X
Marble	√	X
Stainless Steel	*	X
Brass	*	X
Titanium	*	X
Bare Metal	*	X

* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.

Video

Machine Guiding Video

How to choose a reliable laser cutter
WATCH NOW

▷ How to choose a reliable laser cutter
Machine Guiding Video

How to setup your nova laser cutter
WATCH NOW

▷ How to setup your nova laser cutter
Machine Guiding Video

DPES Sign Fair with Thunderlaser in 2016
WATCH NOW

▷ DPES Sign Fair with Thunderlaser in 2016
Machine Guiding Video

How to install HR head
WATCH NOW

▷ How to install HR head
Machine Guiding Video

Auto focus
WATCH NOW

▷ Auto focus
Machine Guiding Video

How the Mars Motorized table works
WATCH NOW

▷ How the Mars Motorized table works

FAQ

1.Do I have to record all the cutting/engraving parameters for different materials in a paper?

No need. We’ve added a parameter library in the software, once you find out what settings is best for a certain material;you can record it in the parameter library. Next time you cut the same material, you just need to read it from the list.

2.Does your laser run from a laptop or Desktop PC?

Both ok, as long as your operating system is Windows XP/2000/Vista/7/8/10.

3.Does your laser run in Windows XP?

Our laser runs on Windows XP/2000/Vista/7/8/10 both 32bits and 64bits system. But it does not run on Mac OS.

4.What software is suggested to design my jobs?

CorelDraw and AutoCAD are suggested. You can design all your artworks in these two software and then send to the RDWorks software to set the parameters easily.

5.What files is the software compatible with?

JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW

6.Will it engrave from a jpeg image?

Yes.

7.Can I take a picture and engrave the image on an object without any hassles?

Yes, you can take a photo by using a camera and then load the photo to the software directly and engrave it.

8.Does machine comes ready to work?

the laser machine is ready to work, the exhaust fan and the air pump and the water pump are included. (But when you using a big power laser tube, it is suggested to buy a water chiller for cooling the laser tube)

https://www.thunderlaser.com/how-to-use-your-laser-machine/how-to-setup-your-mini60-laser-system.html

https://www.thunderlaser.com/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cutter.html

9.How much time do I need to spend on learning how to run the laser machine?

As long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too.

https://www.thunderlaser.com/video/what-laser-cutter-can-create.html

https://www.thunderlaser.com/video/how-to-use-your-laser-machine.html

https://www.thunderlaser.com/video/how-to-use-your-laser-software.html