-
How to add Reverse compensation setting in software
Release Time:2020/05/13Browsing Times:1579
Before you use the laser machine. Please remove the transparent bag from the front of honey comb plate. The transparent bag has a set of USB flash drive, and an engraving test sample. The USB flash...
-
How to install the handle
Release Time:2020/05/13Browsing Times:860
The tool you need Place the handle on the outside of the hole and the screws on the inside of the hole. l Fix the screws by hand firstly. l Then, fix the screws with the tool( using the...
-
User manual for LCD control panel
Release Time:2018/11/16Browsing Times:1324
Contents 1 Function of the Buttons……………………………………2 2 The main interface……………………………………4 2.1 Speed Key……………………………………5 2.2 Max Power Keys……………………………………5 2.3 Set the Layer Parameters……...
-
Operation manual for Thunder laser machine
Release Time:2018/11/16Browsing Times:1916
Operation manual for Thunder laser machine To be safe, never ever run the laser system unattended. According to international standard,“O”means close;“I”means open for the...
-
How to disassemble your Nova
Release Time:2018/11/16Browsing Times:2103
The Users Guide section will walk you through 6 steps for learning how to disassemble your Nova Note: There’s glass laser tube inside the laser machine, be careful and do not collide with a...
-
Maintenance manual for Thunder laser system
Release Time:2017/06/26Browsing Times:7139
Proper care and routine maintenance of the machine will ensure optimal performance over a long service life. DAILY CHECK LIST ☑ Focus lens WEEKLY CHECK LIST ☑ Reflector ☑ Laser combiner ☑ Keep mach...