Making a difference for our customers

Sales Email: sales@thunderlaser.com
 Tech Email: tech@thunderlaser.com

troubleshooting troubleshooting
Location:Home > troubleshooting > System maintenance and replacement > How to adjust and replace the motor?
Image-1

How to adjust the laser beam path


Image-1

How to install new laser tube


How to adjust and replace the motor?

Release Time:2016/12/13 System maintenance and replacement Browsing Times:2258


Firstly, disconnect the machine from its power source.

① X-axis Motor

Screw A: There are four screws A, for fixing the X motor;
Screw B: It’s for adjusting the belt tension, please loosen the four screws A before adjust belt.

Click the link below for instructions video:
  • ●X motor disassembly

  • ●X motor reassembly



② Y-axis Motor

Screw A: There are three screws A.
Screw B: It’s for adjusting the belt tension, please loosen three screws A before adjust belt.
Screw C: There are four screws C, for fixing the Y Motor.

Click the link below for instruction video:
  • ●Y motor disassembly

  • ●Y motor reassembly



End.