Making a difference for our customers

Sales Email: sales@thunderlaser.com
 Tech Email: tech@thunderlaser.com

troubleshooting troubleshooting
Location:Home > troubleshooting > Maintain
Image-1

Thunder Laser Video


How to choose a reliable laser cutter

WATCH NOW
▷ How to choose a reliable laser cutter
Image-1

Thunder Laser Video


How to install HR head

WATCH NOW
▷ How to install HR head

Maintain

Release Time:2017/06/26 troubleshooting Browsing Times:501

Maintenance of the machine is generally maintained in the following four aspects:

A.Lens and mirror:

① Focus lens (please clean after use) ② Reflector (please clean then once a week) ③ Laser combiner (please clean once a week)

B.Rails and Screws:

① X/Y axis Rails(please add oil once a month) ② Z axis Screws(please add oil once a month)

C.Laser path:

① When the laser head move to four corners of the working table, check if the laser beam lasers to the same position on the third reflective mirror. ② When the laser head moves to four corners of the working table, check if the laser beam can vertically go through the acrylic. (Please check once a month)

D.Water Chiller:

① Cooling water(please change once a month) ② Filters(please clean once a month)




The following are specific maintenance methods:

1.Focus lens

1.Remove the laser head 2.Rotation to the left, and the head is divided into two parts
3.Direciton of rotation 4.Installation and please concave downward (convex side of the lens is facing upwards)


2.Reflector

The Mirror#1 Use alcohol to clean mirror with cleaning paper/ cleaning cloth
The Mirror#2 Use alcohol to clean mirror with cleaning paper/ cleaning cloth
The Mirror#3 Use alcohol to clean mirror with cleaning paper/ cleaning cloth


3.Laser beam combiner

Clean both sides of beam combiner with alcohol


4.Rails and Screws

X and Y axis rails Add lubricant oil (or Rust Preventative Grease) to all rails
Z axis screws Add lubricant oil (or Rust Preventative Grease) to four Z axis screws


5.Laser path

①When the laser head move to four corners of the working table, check if the laser beam lasers to the same position on the third reflective mirror.Laser power:30%(Max power on display) ②When the laser head moves to four corners of the working table, check if the laser beam can vertically go through the 10mm acrylic.Laser power:30%(Max power on display)

Video in our website (video→How to use your laser machine)

http://www.thunderlaser.com/how-to-use-your-laser-machine/how-to-adjust-the-laser-beam-path.html



6.Water chiller

1.Change the pure(distilled) water 2.Clean the filters


More detail please refer to the Chapter 5 Maintenance of User’s Manual.