Making a difference for our customers

Sales Email: sales@thunderlaser.com
 Tech Email: tech@thunderlaser.com

troubleshooting troubleshooting
Location:Home > troubleshooting > How to run several laser machines with one PC
Image-1

Thunder Laser Video


How to choose a reliable laser cutter

WATCH NOW
▷ How to choose a reliable laser cutter
Image-1

Thunder Laser Video


How to install HR head

WATCH NOW
▷ How to install HR head

How to run several laser machines with one PC

Release Time:2016/11/17 troubleshooting Browsing Times:861

If there are several USB interfaces with your PC, it’s able for one PC (laser software) to connect with several machines.


But pc will does only communicate with one machine and sending the file into the laser in the same time


For USB connection as below


2


1. When connecting with the first machine, it’s connected automatically as default.


2. When connecting with the second machine, please click the “Add” below, then click “USB” and choose COM3 (or other ports).


3. When connecting with more machines, it’s the same as 2. (Just choose different COM ports)


If you use Ethernet interfaces,please refer to the following video teaching you how to set network. And the way of adding more Ethernet port is the same as above.


http://www.thunderlaser.com/how-to-use-your-laser-software/19-how-to-connect-the-laser-using-a-ethernet-cable.html